When you realize that your water does not seem to be getting as clean from the laundry, or when it is difficult to get a glass of ice cold water in the kitchen sink. Check out this article on how often your local utility company recommends that you can expect their service technician to come and check up on your pressure-loss condition at home.
What Is A Lift Station?
Lift stations are intended to ensure that business and restaurant waste flows easily and unobstructed into your city’s main sewage system. After entering the lift station, garbage is forced through a strong grinder and into the main city line. The lift station pumps are controlled by a simple flotation mechanism similar to those found in the water tank at the rear of a toilet – comparable to a little elevator!
If lift stations are simply intended to handle “sanitary garbage,” they usually need relatively minimal maintenance. They are, however, usually connected to a grease station in commercial situations. This implies that regular maintenance is required to keep everything running smoothly.
Why Is It Necessary To Clean The Lift Station And Grease Trap?
If your lift station system includes a grease station, there’s a significant probability that the quantity of grease permitted to accumulate over time may create problems. Grease may quickly accumulate on the pump and floats that transport waste away from your house, causing the whole system to fail. Large quantities of grease may also cause the float system to run indefinitely. The motor on the pump might burn out if the float system continues to operate after the system has been emptied.
Keeping A Lift Station Clean
Fortunately, frequent lift station cleaning may assist to avoid these problems. If you see oil accumulating around the walls of the lift station or float system, clean it as soon as possible. To avoid significant difficulties, many big restaurants follow a rigid 90-day cleaning cycle, while smaller companies may need to consult with their local plumber to establish a good cleaning plan.
Get In Touch With A Plumbing Company Right Now
Do you have a grease trap or a lift station that needs to be cleaned? Don’t wait until the system has blown to call for assistance! A plumber can assist you in understanding more about the advantages of regular plumbing maintenance for your company.
Below the lift station is the floor slab, which can start to leak over time. Find out more in What Is A Slab Leak & How It Affects Water Billls.
Frequently Asked Questions
How do you maintain a lift station?
A: To maintain a lift station, part of the task is to check the pressure of all water pipes at least three times during every shift.
How do you test a lift station?
A: You can use a pump to fill your lift station with water and then turn on the pumps. If you see that it starts sucking in air, this means there is an issue somewhere in the system.
Do residential lift stations smell?
A: Residential lift stations do not have a smell.
Related Tags
- sewage ejector pump
- grinder pump