Is your property supplied with water from a well? If you answered yes, you probably have low water pressure as well. Rather than putting up with low water pressure (which may be a real pain), there are a few things you can do to increase it.
What You Can Do About Low Water Pressure
Unfortunately, low water pressure can be a common problem associated with well systems. In order to improve your water pressure and avoid the hassle of replacing parts or digging up old ones, there are three steps you should take that will help get your system flowing again.
What Is A Good Well Water Pressure?
Water pressure in a well should be between 40 and 60 psi. Low water pressure may be caused by a variety of factors, but there are also several strategies to enhance it.
1. Take Care Of Your Pressure Tank
Water pressure in a residence should be between 40 and 60 psi on average. Those that need to raise this amount should do it as follows:
- Turn off the circuit that supplies power to the well pump.
- With an air pressure gauge, check the air fill valve to see where your pressure is.
- Increase the water pressure if it’s hovering at 40 psi or below by changing the pressure switch (this is located on the pipe connecting the well and pressure tank).
- Open a faucet to test the water after turning on the circuit.
- Repeat these procedures if required to make any adjustments.
2. Get Your Pipes Inspected
Plumbing pipes blocked with loads of grit and minerals are a typical cause of low water pressure. In houses with hard water, this buildup will form, causing damage to pipes and preventing a smooth flow of water. Have your pipes tested and cleaned, and a water softener installed to combat this (or have your current one serviced).
3. Install A New Constant Pressure System
Consider building or installing a constant pressure system to aid your pressure tank in giving your house improved water pressure. When several fixtures are commonly used, this item is inserted on the water line that enters your property and prevents water pressure from falling. To install new parts and pieces and examine and service your plumbing, contact your local plumber.
Do you have any doubts about whether or not a constant pressure system is good for you? Water pressure booster pumps may be available from a local plumber, and they can assist you in determining the optimum option for your well water system.
If you have a well system, your water pressure can be low. In order to fix this issue, you may need to replace the pump.
Frequently Asked Questions
How do you increase water pressure on a well system?
A: Increasing water pressure on a well system is done in the following way. The first step would be to identify where your pump will be located and install it accordingly. A second or third hand pump can then add water to the pipeline by running its intake within inches of underground pipework that has been dug so as not to create noise or vibrations while drawing from the ground above.
Low water pressure may not be your only plumbing issue. There are others that you can actually fix or avoid on your own, one of which is hair clogs. Find out more in How To Avoid Hair Clogs In Your Drains.
Related Tags
- what causes low water pressure in the whole house with a well
- suddenly no water from well
- sudden low water pressure in house with well
- well water pressure problems
- what is good water pressure for a well